Do you want a detailed Hakko-CHP-170 Micro Cutters Review? If yes, then this article is meant for you.
There is always one thing or the other to fix around the house. If it’s not the pipe, it’s repainting the kitchen wall or fixing the wiring around the house. Since we can’t call a technician every time something goes wrong in the house, we need to fix some things ourselves.
For that, we need some home tools, and one essential home tool every house should have is a micro cutter.
So if you don’t have this tool, you should get one. And if you have one but looking to get a better one – this review is for you.
We shall take an explicit look at the features, functions, and usage of the Hakko-CHP-170 Micro Cutter. We shall also look at similar products to enable you to make an informed choice as to which to buy.
Stay with us.
What is the Hakko-CHP-170 Micro Cutter, and Who is It For?
The product is an excellent home tool that every house (or office) should have. This tool is very versatile as it is a general use tool.
The Hakko CHP-170 Micro Cutter comes with a single micro soft-wire cutter. The micro soft-wire cutter is used to flush-cut cables that are up to 16 gauge (1.3mm) copper and soft wire.
The sharp edges of the micro cutter work like scissors’ would. The sharp edges slightly bypass each other. This bypass produces flatter, flusher cuts. As a result, the bypass blade is known to increase longevity in the tool.
READ ALSO: Anbes Soldering Iron Kit Electronics 60W Adjustable Welding Tool [Review]
This is because the two sharp edges aren’t continually contacting and wearing each other; therefore, the blades stay sharp longer. This tool is excellent for both professional and home use. It is effortless to use, safe, and very efficient.
Anyone can use this micro cutter, and because of its wide range of uses, different professions can use this tool. These professions include a jeweller, a technician, an electrician, an electronic repairs, e.t.c.
Also, since the micro cutter is perfect for home use for professional use, non-professionals can use the tools. It can be used to fix stuff around the house and even in the office.
Features and functions of the Hakko-CHP-170 Micro Cutter
The micro cutter, as said earlier, is perfect for both home (and office) and professional use. Let us now proceed and take a good look at this product. Check out its features and how it works.
The Hakko-CHP-170 Micro Cutter is a flush cutter tool. This implies that, instead of cutting a wire like a conventional wire cutter, it flush-cuts a wire. This flush cutting creates a smooth, neat, and just perfect, instead of a conventional cutter that is jagged, angular, and uneven.
READ ALSO: Lincoln Electric ED030584 MIG Welding Wire Review
The two tips of the micro cutter are specially designed to flush-cut micro soft-wire. The tips are 8mm long jaw with angled head for perfect flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire.
Moving on from the tips, the carbon steel used to make this product is 2.5mm heat-treated carbon steel. This ensures that the construction of the micro cutter provides durability and long life. In other words, this product is built to last. This makes the product not only effective but also long-lasting.
The Hakko-CHP-170 Micro Cutter also possesses precision-ground holes and surfaces. This provides smooth movement while using the tool. This product also has a spring return tool that helps position the tool perfectly and, consequently, reduce operator fatigue.
That’s not all. The micro cutter also has another interesting feature. The handle of the product is shaped in a Dolphin-style with strong hand grips and curved fore-edged. This special design provides absolute comfort and control. It also ensures that the tool cannot slip off while in use.
How to use the Hakko Micro Cutter
The Hakko Micro Cutter is probably one of the easiest tools to use. Specially designed to aid users effectively using this tool, you should have no stress at all getting the hang of this tool.
The first step is to place your palm on the dolphin-shaped handle of the device. When the tool is wedged tightly between your palm, grip it. Thanks to its curved fore-edge, there is no chance of the tool slipping off your hand.
While slightly gripping the tool, place it against the wire you want to cut and tighten the grip until the wire is cut.
Just follow these simple steps to use this device effectively. Simple as ABC. No stress.
Comparing the Hakko CHP-170 Micro Cutter with other similar products.
The IGAN-330 wire flush cutter is another effective tool used to flush cut a wire. The physical features are very similar to that of the Hakko CHP-170 Micro Cutter, but there are slight differences in their makeup, although their usage follows the same steps.
The IGAN-330 wire flush cutter is an ultra-Sharp Wire Cutter that is 13mm long with an upgraded jaw, enabling it to effectively carry out flush-cutting applications on up to 12 gauge (2.0mm) copper and soft wire.
The IGAN-330 wire flush cutter has a hardness of CR-V. This means it’s made of heat-treated chrome vanadium steel instead of the Hakko CHP-170 Micro Cutter that is made up of heat-treated carbonated steel.
Thee IGAN-330 wire flush cutter’s compact design gives it longer cutting jaws than that of the Hakko CHP-170 Micro Cutter.
These longer jaws enable the tool to make flush and fast cuts in tight spaces, but it is also difficult to manipulate between the palms.
Even though both tools are designed to ensure a Comfortable grip by the user, the IGAN-330 wire flush cutter is ergonomically designed with a non-slip rubber handle. At the same time, the Hakko CHP-170 Micro Cutter has parkerized surfaces for comfortable operation.
The IGAN-330 wire flush cutter cutting ability is limited to Plastic Φ3.0mm, Soft wire 12 AWG, Copper wire 12 AWG (Φ2.0mm), Iron wire 14 AWG(Φ1.6mm).
It is also ideal for cutting small wire, sprue, tie wrap, beading wire, zip ties, plastic and can be used to trim small copper, brass, iron, and aluminium.
READ ALSO: 17 Best Desoldering stations Trending Now
The Hakko CHP-170 Micro Cutter is also effective for the aforementioned ranges of products but can also cut a 16 gauge (1.3mm) copper and soft wire which is not ideal for the IGAN-330 wire flush cutter.
Both products should not be used on steel wire. Also, the thicker part of both products’ blades should be used when cutting large gauge wires.
Lastly, another major difference between both devices is weight. While the IGAN-330 wire flush cutter weighs 3.2 ounces, the Hakko CHP-170 Micro Cutter weighs 0.6 ounces.
To get more information about the product, click below
Klein D275-5 flush cutter is a flush cutter with an improved knife design. It is used to snip wire up to 16 AWG, producing a flat and flush cut. This particular device is very similar to the Hakko CHP-170 Micro Cutter in terms of features, functions, and usage.
The only major difference is that the Klein D275-5 flush cutter has an ultra-slim profile.
This means that the Klein D275-5 flush cutter’s body build is slimmer than that of the Hakko CHP-170 Micro Cutter.
This ultra-slim profile gives it an extra advantage when it’s being used in confined areas. However, it also implies that the Klein D275-5 flush cutter is not as strong as the Hakko CHP-170 Micro Cutter.
To get more information about the product, click below
Pros of Buying the Hakko Micro Cutter
The Hakko Micro Cutter comes with quite a number of added advantages that would make choices to buy this product worth it.
The first on the list of its added advantages is the shaping of the tip of the device. The tip of the Hakko Micro Cutter is angled. This angled head enables the precise cutting of the desired object.
Another advantage of the Hakko Micro Cutter is its weight. The device is lightweight, weighing only 0.6 ounces. This ensures that the device is easily manipulated and easy to move around.
READ ALSO: SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar [Review]
The Hakko Micro Cutter is made up of heat-resistant carbon steel. This means the device is very durable and long-lasting.
That’s not all. The Hakko Micro Cutter is designed in a dolphin shape. This special design ensures that the device does not slip off the user’s hand during use. This minimizes any injury to the user.
To cap it off, the price of the Hakko Micro Cutter is also very affordable.
Cons of buying The Product
Despite the numerous advantages of the Hakko Cutter, there are some downsides to using the product.
The first is the tip of the device. To enable the device to flush-cut a wire effectively, the tips have to be sharp. The tips’ sharpness might cause some injuries to the user if the device is not properly handled.
READ ALSO: LONOVE Soldering Iron Station Kit – 60W Solder Station [Review]
This also implies that Hakko Cutter should be kept away from the reach of children.
Lastly, the Hakko Cutter is designed to cut 16 gauge (1.3mm) copper and soft wire; anything thicker than that might prove difficult.
Conclusion
There it is. An extensive review of the Hakko CHP-170 Micro Cutter and other similar products. We hope that this review would give you enough information to decide which flush cutter to buy.
Perhaps, you are using this particular Hakko-CHP-170 Micro Cutter? Do share your experience with the tool in the comment section below.
Won’t it be great if you can share this product with friends and families? We’re quite certain they’ll appreciate it and find this product to be handy.
Thanks for reading!
